• Do not interrupt power or reboot during flashing. Wait until the tool reports success.

    • Once the ToolBox is installed, follow these steps:

    Important Notes During the Process:

    The drive will usually flash quickly, and the system may require a restart to finalize the installation. Once the computer reboots, reopen the ToolBox to verify that the firmware version number has changed.

    Firmware is often capacity-specific. A 240GB SU630 uses a different flash controller configuration than a 960GB model. Ensure you download the firmware tool designed for your exact part number.

    "No New Firmware Found" If the ToolBox tells you that you have the latest firmware, you are good to go! ADATA sometimes rolls out updates in batches, or your specific drive revision might already be up to date.

    "Update Failed" or Drive Not Detected

    The Drive is Not Booting After Update This is rare but can happen if the update affected the boot partition. You may need to boot from a Windows installation USB and run a "Startup Repair" or use the bootrec /fixmbr command in the command prompt.

    If your drive is supported, the Toolbox will have a "Firmware Update" button.

    Note: For many SU630 drives, the Toolbox may say "No update available" even if one exists. This is common. Proceed to Method B.

    Search Games