Remove batteries from the transmitter. Store in a cool, dry place between -10°C and 50°C (14°F to 122°F).
(Table omitted per short format — summary below)
(Only in Repeater Mode) The WTR2 has a "Disconnect Threshold" setting (usually -70dBm to -90dBm). If the main router’s signal drops below this level, the WTR2 will stop trying to connect. aodelan wtr2 user manual
The WTR2 features a switch on the side of the transmitter. Here is what each symbol actually does:
2S (2-Second Delay):
BULB (Long Exposure):
When the transmitter LED flashes slowly (once per second) when a button is pressed, replace the AAA batteries immediately. Weak batteries can cause unexpected signal loss. Remove batteries from the transmitter
WPS (Wi-Fi Protected Setup) is supposed to make pairing instant. On the Aodelan WTR2, it works... sometimes.
Understanding the hardware is essential before programming or pairing. (Table omitted per short format — summary below)
© 2025 BD Results 24