Whether you are installing a brand new security system or performing maintenance on an existing one, the first hurdle is often the most frustrating: connecting to the camera. Without the correct IP address, your camera is invisible to your network.
This is where the CP Plus IP Finder Software (also known as CP Plus GSM Utility) becomes an indispensable tool. In this guide, we will walk you through how to use this tool to detect, configure, and troubleshoot your CP Plus cameras.
Most cameras ship with a default static IP (e.g., 192.168.1.108). If your home network uses a different subnet (e.g., 192.168.0.x or 10.0.0.x), the camera will be "invisible" to your browser.
If you have a CP Plus NVR, go to Menu > Camera > IP Camera. The NVR has a built-in "Device Search" function that acts exactly like the PC software. cp plus camera ip finder software
CP Plus cameras support ONVIF (Open Network Video Interface Forum). This powerful tool discovers any ONVIF-compliant device regardless of brand. It often finds cameras that proprietary tools miss, especially on complex networks.
CP Plus Camera IP Finder is a utility provided by CP Plus to discover, configure, and manage IP cameras and network devices on the same local network. It simplifies initial setup by locating devices, showing their IP/MAC/port info, and offering quick access for configuration (often via a web interface or bundled client software).
This is the official, most widely used software. It is an all-in-one device management suite that includes IP discovery, batch configuration, firmware updates, and password reset functionalities. Whether you are installing a brand new security
Key Features:
Step 1: Install and Launch Run the installer as Administrator. Once installed, launch “Smart Manager” or “Config Tool.” You may see a login prompt. The default credentials are often:
Step 2: Select Network Interface If your PC has multiple adapters (Ethernet + Wi-Fi), choose the active one connected to the same switch as the camera. Most cameras ship with a default static IP (e
Step 3: Initiate Device Search
Click the “Refresh” , “Search” , or “Device Discovery” button. The software will send broadcast packets to 255.255.255.255 and wait for responses from CP Plus devices.
Step 4: Review the Results
Within 10–30 seconds, a table populates. Look for your camera model (e.g., “CP-UNC-TA21L2”). Note the IP Address column. If the camera is on a different subnet, it will appear with a “Cross-Segment” warning and a different IP (e.g., 192.168.1.100 while your PC is on 10.0.0.5).
Step 5: Modify the IP (If Necessary) To access the camera:
Step 6: Access the Web Interface
Open a web browser. Type http://[new-ip-address] (e.g., http://192.168.1.200) into the address bar. You should now see the CP Plus camera’s login page. Use the default credentials (admin/admin) to access live view and settings.