Process:
Progress bar goes 0% → 100%. Do not interrupt.
Inside the MPTool folder, locate DriverInstall.exe or Installer_x64.exe.
A dedicated mode in MPTools/ChipyC that automates the setup process and validates the physical storage before the user ever copies a single file. firstchip chipyc2019 mptools new
Before downloading software, you must confirm your controller. The ChipYC2019 is a 48-pin QFN package controller supporting:
Before diving into the software, we must understand the hardware. FirstChip (also known as ChipsBank in some iterations) produces USB 2.0, USB 3.0, and SATA bridge controllers.
The CHIPYC2019 is a specific variant often found in: Process:
Key Features of CHIPYC2019:
However, like many controllers, it is prone to firmware corruption due to improper ejections or voltage fluctuations. When this happens, Windows shows "Please insert disk," "0 bytes," or the drive fails to initialize. This is where MPtools New comes in.
Search for "FirstChip MPTool 2024 latest" or use a known pack like FC_MPTool_v3.3.88.rar. Extract to a short path (e.g., C:\MPTool) to avoid Windows path-length errors. Progress bar goes 0% → 100%
Even with the new tool, you may encounter errors. Here is how to fix them:
| Error Code | Meaning | Solution with New MPtools | | :--- | :--- | :--- | | 0x110 | Bad Block threshold exceeded | In "NAND Setting," increase "Allow Bad Block" to 100. The tool is being too strict. | | 0x104 | Flash download failure | Your NAND is physically degraded. Try "Slow Speed" mode (only available in New tools). | | 0x181 | ISP (In-System Program) timeout | You need to short the LED pins on the PCB during the 2-second power-on to force ROM mode. | | Check Chip Fail | Incorrect tool version | The "New" tool doesn't support this specific NAND combination. Wait for a firmware database update. |