How Do I Reset My Provision Dvr Password -

If you cannot generate a security code (e.g., the DVR has no network access and you lost the serial number sticker), you must perform a physical factory reset.

Warning: This will erase all settings (network IP, motion detection) and may erase recorded video depending on the model.

If you followed Method 1 (Security Code) and the generated code fails, try these fixes: how do i reset my provision dvr password

  • Write down the Serial Number exactly as it appears. This is crucial.
  • On a separate computer or phone, open a web browser and go to the official Provision-ISR password reset tool. (Search for "Provision ISR password reset tool" or look for the "Support" section on their official website—the URL changes, but the tool is usually called Provision DVR Password Generator).
  • Enter the Serial Number into the required field.
  • Click Generate. The tool will produce a temporary Reset Password code.
  • Type that temporary code into your DVR's "Security Code" or "New Password" field.
  • Press "OK." The DVR will immediately log you in and prompt you to set a permanent new password.

    • Warning: This temporary code usually expires in 5-10 minutes. Do not let the screen time out.

    ✅ Write down your password and store it in a secure place (password manager).
    ✅ Set a security question in System → User → Password Recovery (if your model supports it).
    ✅ Export your settings via USB – Main Menu → System → Config Backup. If you forget the password, you can restore the backup after a reset.
    ✅ Update firmware – newer Provision DVRs have email/SMS password recovery options. If you cannot generate a security code (e

    Provision-ISR designs its DVRs with strong security to prevent thieves from tampering with footage. Consequently, there is no universal "default password" that works for all models. While older models might accept admin / 12345, newer firmware requires a unique reset process.

    You will need one of the following to proceed: Write down the Serial Number exactly as it appears

    Use when you cannot log in at all and Method 1 fails.

  • Using a paperclip, press and hold the reset button.
  • While holding, power on the DVR. Keep holding for 15–20 seconds.
  • Release the button. The DVR will boot into factory defaults.
  • Login with default credentials (usually admin / admin or admin / no password).

    • ⚠️ Warning: This clears all settings (network, recording schedules, users) but not recorded video.