Nalco Ultimer 7752 Msds New May 2026
The new SDS provides stricter guidance for spills:
A standout feature of Nalco Ultimer 7552 is that it is a water-solution polymer derived from polyamines, but it behaves like a solid polymer in terms of performance.
Why this is interesting: Traditionally, high-efficiency coagulants often required dissolving solid blocks or beads (which can be messy, slow, and require special handling equipment) or using oil-based emulsions (which add hydrocarbons to the water system).
Ultimer 7552 bridges this gap using "Ultimer" technology:
Safety Bonus: Because it is a water-based solution, the SDS typically classifies it as non-flammable and significantly less hazardous than solvent-based alternatives, reducing the need for specialized fire suppression or volatile organic compound (VOC) monitoring.
The safety and technical profile of Nalco ULTIMER 7752 is characterized by its low-hazard profile and use in industrial water treatment. Official Safety Data Sheets (SDS) for Nalco Water products are generally not available for direct public download and must be requested through the Ecolab SDS Request Form. Key SDS Profile: ULTIMER 7752
Based on available safety documentation, the product exhibits the following properties:
Hazard Classification: Generally considered non-hazardous under normal industrial use. Health injuries are not known or expected for eye contact, skin contact, ingestion, or inhalation. Physical Properties: Appearance: White liquid with a slight chlorine odor. pH: Acidic, ranging from 3.0 to 4.1 at 100% concentration. Boiling Point: Approximately 100∘C100 raised to the composed with power C 212∘F212 raised to the composed with power F Flash Point:
>93.3∘Cis greater than 93.3 raised to the composed with power C
>200∘Fis greater than 200 raised to the composed with power F ), typically tested via Pensky-Martens closed cup. Pour Point: -5∘Cnegative 5 raised to the composed with power C 23∘F23 raised to the composed with power F Toxicity: Acute oral toxicity is estimated at Technical Application
ULTIMER 7752 is a water-soluble polymer technology designed primarily for:
Wastewater Treatment: Used for primary and secondary effluent clarification.
Operational Efficiency: Unlike traditional latex flocculants, ULTIMER technology does not use hydrocarbon solvents or surfactants, which can reduce hazardous waste and overall disposal costs.
Ease of Use: It is designed to work without specialized polymer "make-down" equipment or long activation times. Emergency and Handling Contact
In the event of a chemical emergency or to obtain the most recent 2026 version of the SDS, use the following official Ecolab/Nalco resources: Request Form: Nalco Water SDS Request Emergency Phone: (800) 424-9300 (CHEMTREC 24-Hour)
Main Office: Nalco Water, 1601 W. Diehl Road, Naperville, IL ULTIMER™ Polymer Technology - Ecolab
The Nalco Ultimer 7752 Safety Data Sheet (SDS) outlines the physical and chemical properties of a specialized water-based polymer used for industrial wastewater treatment. Designed to improve the capture efficiency of solids and facilitate water reuse, the "new" or latest versions of this SDS prioritize environmental sustainability by highlighting the product's lack of hydrocarbon solvents and volatile organic compounds (VOCs). Chemical Identity and Physical Properties
Nalco Ultimer 7752 is a liquid polymer typically used as a flocculant in primary and secondary wastewater treatment. Key physical characteristics listed in the SDS include: Appearance: White liquid. Odor: Chlorine-like or negligible. nalco ultimer 7752 msds new
pH Level: Ranges from 3.0 to 4.1 at 100% concentration, indicating an acidic nature. Solubility: Fully miscible in water. Boiling Point: Approximately 100∘C100 raised to the composed with power C 212∘F212 raised to the composed with power F
Flammability: Not flammable or combustible; it does not have a flash point under standard conditions. Safety Hazards and First Aid
While modern Ultimer technology is designed to be safer than traditional latex-based flocculants, standard safety protocols remain essential.
Health Hazards: Under normal use, health injuries are generally not expected or known. It is not currently classified as a hazardous chemical by major standards like OSHA. First Aid Measures: Eye Contact: Flush with water immediately. Skin Contact: Wash the affected area with soap and water.
Inhalation: Move to fresh air; symptomatic treatment is usually sufficient.
Firefighting: Since it is non-flammable, standard extinguishing media like water spray or foam are appropriate for surrounding fires. Environmental Impact and Handling
One of the primary benefits highlighted in the latest Nalco Ultimer documentation is its reduced environmental footprint.
Sustainability: Unlike older emulsion flocculants, Ultimer 7752 does not contain oils or surfactants, which significantly reduces VOC emissions and hazardous waste output.
Storage: Should be stored in labeled, tightly closed containers away from heat sources and oxidizers.
Disposal: While not inherently hazardous waste, it must be disposed of according to local, state, and federal regulations. ULTIMER Polymer Technology | Ecolab
Feature: Improved Chemical Resistance and Safety Data Sheet (MSDS) Compliance for Nalco Ultimer 7752
Description: The Nalco Ultimer 7752 is a high-performance, industrial-strength chemical product used in various applications. To ensure safe handling, storage, and usage, it is essential to have an up-to-date and accurate Safety Data Sheet (MSDS). The new feature focuses on enhancing the chemical resistance and MSDS compliance for Nalco Ultimer 7752.
Key Enhancements:
Benefits:
Technical Requirements:
Timeline:
The development of the feature is expected to take approximately 12 weeks, with the following milestones: The new SDS provides stricter guidance for spills:
Resource Allocation:
The development of the feature will require:
By investing in this feature, the company can ensure the safe and effective use of Nalco Ultimer 7752, while also demonstrating a commitment to regulatory compliance and customer support.
Nalco ULTIMER® 7752 is a water-based polymer technology used primarily for wastewater management and water clarification . According to the Safety Data Sheet (SDS), it is generally not classified as a hazardous substance under normal use. 1. Product Identification & Properties Product Name: ULTIMER® 7752 Physical Form: White liquid Chlorine-like Flash Point: > 93.3°C (Non-flammable/Non-combustible) 3.0 – 4.1 (at 100%, 25°C) Freezing Point: Pour point of -5°C www.farnese.co.nz 2. Safety & Handling Precautions
While not classified as hazardous, standard industrial hygiene is required: Eye & Skin Protection:
Wear safety glasses and protective clothing. Although health injuries are not expected, it is best to avoid direct contact.
Wash face and hands thoroughly after handling. Remove and wash any contaminated clothing before reuse. Slippage Hazard:
Like many polymers, this product may become extremely slippery when wet. Ensure surfaces are washed thoroughly if spilled. 3. First Aid Measures
If exposure occurs, follow these steps and seek medical advice if symptoms persist: Rinse immediately with plenty of water. Wash off with soap and plenty of water. Ingestion: Rinse mouth. Do induce vomiting unless directed by medical personnel. Inhalation:
Move to fresh air; seek medical attention if symptoms develop. 4. Firefighting & Spill Control Extinguishing Media:
Use media appropriate for the surrounding environment (e.g., dry chemical, foam, or water spray).
Stop the leak if safe. Contain with non-combustible absorbent material (sand or earth) and place in a labeled container for disposal. Do not allow the product to reach soil or waterways. Hazardous Combustion:
May release carbon, nitrogen, and sulfur oxides, or hydrogen chloride under fire conditions. 5. Storage & Disposal
Keep containers tightly closed in a dry, well-ventilated area. Protect from frost and extreme temperatures to prevent viscosity changes or pumping issues.
Dispose of fire residues and contaminated water in accordance with local and national regulations.
For the most current or site-specific version, you can request an official SDS directly through the Ecolab SDS portal in oily wastewater or specific pumping requirements for low temperatures? ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
Understanding the Safety and Performance of Nalco ULTIMER® 7752 Safety Bonus: Because it is a water-based solution,
NALCO ULTIMER® 7752 is a high-performance, water-based polymer used primarily in industrial wastewater treatment. Developed by Nalco Water (an Ecolab company), this product represents a shift toward more sustainable chemical solutions by eliminating the hydrocarbon solvents and surfactants common in traditional emulsion flocculants. Key Safety Data Sheet (SDS) Information
The latest safety data for ULTIMER® 7752 indicates it is generally considered low-hazard under normal conditions of use.
Health Hazards: Health injuries are typically not known or expected for eye contact, skin contact, ingestion, or inhalation under standard operating procedures.
Acute Toxicity: The acute oral toxicity estimate is greater than 2,000 mg/kg. Physical Properties: Appearance: White liquid. Odour: Slight chlorine-like scent. pH: Acidic, ranging from 3.0 to 4.1.
Flash Point: > 93.3 °C (200 °F), meaning it is not considered a flammable liquid under standard transport regulations.
Ecological Impact: Unlike older technologies, ULTIMER® technology reduces VOC emissions and helps lower the chemical and biological oxygen demand in treated water. Core Benefits and Applications
ULTIMER® 7752 is engineered for operational reliability, particularly in systems with highly variable or oily wastewater.
Environmental Sustainability: Because it is water-based, it supports water circularity goals and can be made down using lower-quality process or saline water without losing performance.
Efficiency: It often eliminates the need for additional coagulants, increasing solids capture efficiency (sometimes from 92% to 98%) and reducing hazardous sludge volume.
Ease of Use: It does not require specialized polymer activation equipment or long aging times, which optimizes both labor and equipment costs. Handling and Compliance
While ULTIMER® 7752 is relatively safe, standard industrial hygiene should be followed. Use general ventilation and avoid unnecessary contact with eyes or skin. For a full, site-specific Nalco Safety Data Sheet, users should request the latest version directly from Ecolab's SDS portal to ensure compliance with local regulations. ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
This post is structured for a safety manager, plant operator, or procurement specialist who needs to understand the critical updates and handling requirements.
Title: What’s New in the Nalco Ultimer 7752 SDS? Critical Safety & Compliance Updates
Post Body:
If your facility uses Nalco Ultimer 7752 (a high-molecular-weight anionic polyacrylamide flocculant used in clarification and dewatering), it’s time to review the latest SDS revision. Manufacturers like Nalco Water (Ecolab) periodically update these documents to align with GHS standards (Globally Harmonized System) and new toxicological data.
Here is a breakdown of what has typically changed in recent editions of the SDS and what you must monitor for compliance.
The new MSDS is stricter here, moving from "gloves recommended" to mandatory specifications.
NALCO ULTRIMER 7752 is a specialized, high-molecular-weight cationic organic flocculant, commonly used in industrial wastewater treatment, oil sands extraction, and mineral processing. It is typically supplied as a viscous liquid emulsion. With evolving global regulations (specifically GHS Revision 7, 8, or 9), the new Material Safety Data Sheet (MSDS) — now formally called the Safety Data Sheet (SDS) — has been updated to provide clearer hazard communication, first-aid measures, and environmental precautions.