Narishige Pc10 Manual New May 2026

A: Yes. Narishige originally published an English version (Part No. 3304-01E). The most common "new" PDF circulating is a 24-page document dated 1988. Verify it includes the calibration flowchart.

Before operating the PC-10, review the following safety measures:

| Issue | Cause | Solution (per manual) | |-------|-------|----------------------| | Glass drops without pulling | Weight too heavy for heat | Increase heat or reduce weight | | Bulbous tip | Heat too high / too slow | Increase weight, lower heat slightly | | Asymmetric tips | Filament not centered or glass tilted | Realign filament, clean chucks | | Filament burns out fast | Current too high | Use lower heat, replace every 200 pulls | | No separation | Glass ID too large | Use thinner wall glass (<0.6 mm ID) | narishige pc10 manual new

A: This is the most common missing section because it folds out as a diagram. Contact Narishige support directly and ask for the "Solenoid Assembly Supplement."

Since the PC-10 was discontinued, Narishige has moved to the PC-100 (digital, programmable). However, you can adapt parts of the PC-100 manual to understand your PC-10. The heating principles are similar, but the control logic is entirely different. A: Yes

For hardcore vintage fans, there is also a community-driven GitHub repository called "PC-10 Revival Guide," which includes:

If you use these mods, the original manual becomes even more critical as a baseline reference. | Issue | Cause | Solution (per manual)

The latest manual (2020+ reprint) adds:

Missing from manual: No mention of two-step pulling (you cannot do it without modification).