Nokia Ta1304 Flash File Pac File Info
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | S_DL_GET_DRAM_SETTING_FAIL (5054) | DRAM initialization error (Wrong PAC file) | Download the correct PAC version for your hardware revision. | | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) | Driver issue or USB port problem | Change USB port to USB 2.0. Reinstall Unisoc drivers. | | PAC file is corrupted | Incomplete download | Re-download the PAC file. Disable antivirus before extraction. | | Error: Mismatched Image | You are flashing a lower Android version | You cannot downgrade without a custom Auth file (security issue). | | Phone stays dead after flash | Battery completely drained | Leave the phone on a standard charger for 2 hours, then retry flashing. |
In the Nokia ecosystem, the terms are often used interchangeably, but technically:
The Nokia TA1304 PAC File contains all the partitions (prog_nand_fdl, prodinfo, vbmeta, etc.) wrapped into one container. This prevents users from accidentally mixing mismatched partitions.
Searching Google for "Nokia TA1304 flash file free download" yields dozens of suspicious sites (e.g., firmwarefile.com, easy-firmware.net). Here is why you must be careful: nokia ta1304 flash file pac file
Recommendation: Always check the MD5 checksum. Compare the file's MD5 value with the one posted by the original uploader.
Inside a valid TA-1304 PAC file, you will find partitions such as:
| Partition | Purpose |
| --- | --- |
| prodnv | Product NV (IMEI, calibration data) |
| modem | Baseband / modem firmware |
| uboot | U-Boot bootloader |
| boot | Linux kernel + ramdisk |
| recovery | Stock recovery image |
| system | Android system (read-only) |
| vendor | Vendor-specific binaries |
| userdata | Empty user data (for factory reset) |
| persist | Sensors, WiFi MAC, BT address | | Error Code | Meaning | Solution |
⚠️ Warning: Flashing a PAC file from a different region (e.g., Global vs. India vs. LATAM) may cause IMEI loss, network lock, or boot failure.
Users and technicians flash a PAC file to the Nokia TA-1304 for these common reasons:
| Issue | Solution via PAC | |-------|------------------| | Soft brick (boot loop, stuck on logo) | Reflash full PAC | | Hard brick (no power, no response) | Use FDL with PAC to revive | | FRP lock (Google account verification) | Flash specific PAC (with FRP patch or after wiping) | | System corruption / malware | Clean factory restore | | Upgrade/downgrade Android version | Flash appropriate PAC version | The Nokia TA1304 PAC File contains all the
Before diving into the flashing process, it is crucial to identify your device correctly. The Nokia TA1304 is typically a budget-friendly 4G smartphone running Android 9.0 (Pie) or Android 10 (Go Edition). Key specifications include:
Important Warning: Flashing the wrong firmware (e.g., using a TA-1304 file on a TA-1306) will hard brick your device.
The Nokia TA1304 runs on a Unisoc (Spreadtrum) chipset. Because of this, you cannot use older Nokia tools like Phoenix or Best. You must use tools designed for Unisoc processors.