Sharp Ar-5316 Driver For Windows 10 May 2026
Test with a print page.
Sharp never released an official Windows 10 driver for the AR-5316 (it was designed for Windows 95/98/2000/XP).
However, you can still make it work using one of two methods:
After downloading the Sharp AR-5316 driver for Windows 10, follow these steps to install it:
Extract the downloaded .exe to a folder (e.g., C:\Sharp_AR5316). sharp ar-5316 driver for windows 10
Introduction: A Classic Workhorse Meets a Modern OS
The Sharp AR-5316 is a legend in the world of monochrome multifunction printers (MFP). Known for its rugged build, low cost per copy, and reliable digital copying and printing capabilities, it has been a staple in small offices, home businesses, and religious organizations for nearly two decades. However, as technology marches forward, a common crisis emerges: "Where can I find the Sharp AR-5316 driver for Windows 10?"
If you are reading this, you have likely just upgraded to Windows 10 (or 11) and discovered that your beloved AR-5316 no longer appears in your devices list, or Windows throws a cryptic error message. Don’t despair. The printer is likely perfectly functional, but Microsoft’s driver signing requirements and architecture changes have left older peripherals behind. Test with a print page
This article will walk you through everything you need to know: why the driver is hard to find, safe methods to get it working, and step-by-step installation instructions.
The Sharp AR-5316 is a multifunction device. The printing part is easy. The scanning part is very difficult because Sharp’s proprietary TWAIN driver for the AR-5316 was 32-bit XP-only. It will not work on 64-bit Windows 10.
Step 1: Download the correct driver
Do not use generic “driver updater” software. Go to a reliable source (e.g., Sharp’s global archive or a trusted driver repository). Look for the file named: AR-5316 Windows 7 Driver.zip (typically contains AR-5316.inf). Sharp never released an official Windows 10 driver
Step 2: Connect the printer Use a standard USB 2.0 cable (Type A to Type B). Do NOT connect the USB cable yet. If Windows automatically tries to install a driver, let it fail, then proceed.
Step 3: Manual installation via “Add Printer”
Step 4: Test the connection Print a test page. If the page comes out garbled or blank, go back to Step 3 and try selecting “Windows Update” during the driver selection, then look under Sharp > AR-5316 (alternate PCL6 driver).
Download from Sharp’s global or regional support site (search for AR-5316):