Rfid Access Control User Manual — V2000-c
The V2000-c supports three operational modes. Switch using [Master Code] + # + 19 [Mode] #.
| Mode | Code | Behavior | Best Use |
| :--- | :--- | :--- | :--- |
| Card Only | 19 0 # | Swipe or PIN keypad. Relay activates. | Standard office, no high security. |
| Card + PIN | 19 1 # | User must swipe AND enter PIN. | High-security server rooms, labs. |
| Card or PIN | 19 2 # | Either a valid card OR a valid PIN works. | Convenience stores, gyms. |
| Problem | Likely cause | Solution |
|---------|--------------|----------|
| No power | Wrong voltage | Check 12V DC, min 1A |
| Card not beeping | Wrong RFID frequency | Use correct card type (125kHz EM) |
| Green LED but lock doesn’t open | Relay wiring wrong | Check NO/COM or NC/COM based on lock type |
| Buzzer long beep after card | User not enrolled | Add user via programming |
| Door open too long alarm | Door contact stuck | Adjust sensor position or disable with 04 0# |
If you lose the master code:
End of Manual Section for V2000-C
Introducing the V2000-C RFID Access Control System: A Comprehensive User Manual V2000-c Rfid Access Control User Manual
Are you looking for a reliable and efficient access control solution for your organization? Look no further than the V2000-C RFID Access Control System. This user manual provides a detailed guide on how to install, configure, and operate the V2000-C system, ensuring that you get the most out of your access control investment.
Overview of the V2000-C System
The V2000-C RFID Access Control System is a cutting-edge solution designed to provide secure and convenient access control for various applications, including office buildings, schools, hospitals, and more. The system utilizes RFID technology to grant authorized individuals access to designated areas, while preventing unauthorized entry.
Key Features of the V2000-C System
Installation and Configuration
The V2000-C system is easy to install and configure, with a user-friendly interface that guides administrators through the process. The system can be integrated with existing security systems, including alarms and CCTV cameras.
Operating the V2000-C System
The V2000-C system is designed to be easy to use, with a simple and intuitive interface that allows administrators to manage access control with ease. The system can be operated using a variety of methods, including:
Troubleshooting and Maintenance
The V2000-C system is designed to be reliable and durable, but like any system, it may require occasional troubleshooting and maintenance. The user manual provides a comprehensive guide on how to troubleshoot common issues and perform routine maintenance tasks. The V2000-c supports three operational modes
Conclusion
The V2000-C RFID Access Control System is a powerful and reliable solution for managing access control in various applications. With its user-friendly interface, durable design, and advanced features, the V2000-C system provides a comprehensive access control solution that meets the needs of organizations of all sizes. Download the V2000-C RFID Access Control User Manual today and discover how to get the most out of your access control investment.
The V2000-C is a 125KHz RFID standalone access control keypad supporting up to 1,000 users with 4-digit PINs or EM cards. Featuring a Wiegand 26 interface and a 3-8 cm reading range, the weatherproof unit operates on 12VDC and includes relay outputs for locks and alarms. For detailed programming instructions and wiring diagrams, see the uAmper Manual.
The V2000-C RFID Access Control is a waterproof, standalone single-door system supporting up to 2,000 users with RFID card or PIN authentication. It features an adjustable relay for electronic locks, operating on 12V DC, with programming that includes setting user cards, PINs, and access modes. For official digital copies, you can access the Obohands English Manual Download from the manufacturer's site. RFID Access Control System User Manual - uAmper
⚠️ Perform a factory reset if default master code does not work (usually by shorting a reset jumper or powering on while pressing
#). | Problem | Likely cause | Solution |
